W13: Linoz Diagnostics Design Document

Owned by
Philip Cameron-Smith (Unlicensed)
Last updated: Jul 16, 2019 by
Robert Jacob
2 min read

The Design Document page provides a description of the algorithms, implementation and planned testing including unit, verification, validation and performance testing. Please read  Step 1.3 Performance Expectations that explains feature documentation requirements from the performance group point of view. 

Design Document

 Click here for instructions to fill up the table below ......

The first table in Design Document gives overview of this document, from this info the Design Documents Overview page is automatically created.

In the overview table below 4.Equ means Equations and Algorithms, 5.Ver means Verification, 6.Perf - Performance, 7. Val - Validation

  • Equations: Document the equations that are being solved and describe algorithms
  • Verification Plans: Define tests that will be run to show that implementation is correct and robust. Involve unit tests to cover range of inputs as well as benchmarks.
  • Performance expectations: Explain the expected performance impact from this development
  • Validation Plans: Document what process-based, stand-alone component, and coupled model runs will be performed, and with what metrics will be used to assess validity

Use the symbols below (copy and paste) to indicate if the section is in progress or done or not started.

In the table below 4.Equ means Equations and Algorithms, 5.Ver means Verification, 6.Perf - Performance, 7. Val - Validation,   (tick) - competed, (warning) - in progress, (error) - not done


Overview table for the owner and an approver of this feature

1.Description


2.Owner


3.Created 
4.Equ
5.Ver
6.Perf
7.Val
8.Approver
 
9.Approved Date
V2.0
V1.0 
 Click here for Table of Contents ...

Table of Contents




Title: NA3: Linoz Diagnostics

Requirements and Design

NGD Atmosphere

Date:    2019-07-xx

Summary


Requirements

Requirement: (1) update namelist options in the default compset; (2) update size distribution of dust emission fluxes; (3) update the dust emission distribution in the boundary layer

Date last modified: 2019-06-27
Contributors: Yan Feng

The first two updates have been implemented and tested in V1. The third update is implemented and tests are not completed.

Algorithmic Formulations, and Design Implementation


Design Solution:

(1) Change dust optics (dst_a1, dst_a3, dst_c1,dst_c3) in the namelist &cam_inpam to dust_aeronet_rrtmg_c141106.nc

(2) Change fractional emissions in size bins: dust_model.F90. The new dust emission size distribution is calculated based on Kok (2011).

Date last modified: 2019-06-27
Contributors: Yan Feng


Planned Verification and Unit Testing 

N/A


Planned Validation Testing 

Validation Testing: 

Implemented the new parameters and ran sensitivity simulations with V1. Evaluate the model outputs with observations

Date last modified: 2019-06-27
Contributors: Yan Feng


Planned Performance Testing 

No changes in performance