List of resolution combinations that ACME will support AND if needed mapping and domain files exist.
Preferred Tool = tool ACME wants to use to make mapping files.
- ESMF = ESMF Regridder, supports aave, bilinear and patchmap options.
- Tempest = TempestRemap
TempestRemap has several new algorithms with native support for spectral element meshes. These algorithms may eventually be implemented in ESMF, so below when we mention TempestRemap, we are referring to the algorithm, not the tool used to compute the maps. For spectral element source meshes, Tempest conserve (non-monotone) is the most accurate map available and is suitable for upscaling and downscaling. It is a good replacement for ESMF bilinear and patchmap options. Tempest conserve+monotone is a potential replacement for ESMF aave maps, but it has two issues that must be resolved before it should be used in an ACME compset: (1) consistent reference element map between HOMME and TempestRemap, and (2) element-scale artifacts that show up in the land mask defined on the atmosphere grid. These issues are being worked on under the SciDAC Multiscale project.
Domain files (from Mariana): "Domain files specify the grid and mask for all of the data models and also for CLM. CLM uses a global surface dataset where it assumes land everywhere - so where there is ocean it assumes wetland. It then uses the domain.lnd.xxx.nc file to determine its land mask (which is really the ocean land mask mapped to the land grid). By this mechanism you do not need different surface datasets when the land mask is changed (which used to be the case a few years ago).
Low Resolution (for integration testing)
Approximately 2 degrees. Replaces FV 1.9x2.5, T42 with gx1v6 cases.
ATM/LND: ne16, 30L (72L option available)
Ocn/sea-ice: 240km
ice sheet: ais20km or stub model SGLC.
River model: 0.5 degrees
Mapping | Preferred Tool | Name on input data archive (blank = doesn't exist) | Notes |
---|---|---|---|
atm 2 ocn fluxes | ESMF aave | ||
atm 2 ocn state | Tempest conserve | ||
atm 2 ocn vector | Tempest conserve | ||
ocn 2 atm fluxes | ESMF aave | ||
ocn 2 atm state | ESMF aave | ||
ice sheet 2 ocean fluxes | |||
ice sheet 2 ocean state | |||
ice sheet 2 ocean runoff | |||
ocean 2 ice sheet fluxes | |||
ocean 2 ice sheet state | |||
river 2 ocean | |||
lnd 2 river | |||
river 2 lnd |
Medium Resolution (res used for first ACME B-case. Won't be developed further.)
Approximately 1 degree. Replaces FV 0.9x1.25, T85 with gx1v6 cases.
Atm/Lnd: ne30, 30L (72L option available)
Ocn/Sea-ice: 120km
ice-sheet: stub
River model: 0.5 degrees
config_grid.xml entry:
<GRID sname="ne30np4_mpas120" alias="ne30_m120"> a%ne30np4_l%ne30np4_oi%mpas120_r%r05_m%mpas120_g%null_w%null</GRID>
Mapping | Preferred Tool | Name on input data archive (blank = doesn't exist) | Notes |
---|---|---|---|
atm 2 ocn fluxes | ESMF aave | map_ne30np4_TO_MPASO_QU120km_aave.151110.nc | |
atm 2 ocn state | Tempest conserve | map_ne30np4_TO_MPASO_QU120km_bilin.151110.nc | Made with ESMF |
atm 2 ocn vector | Tempest conserve | map_ne30np4_TO_MPASO_QU120km_bilin.151110.nc | Made with ESMF |
ocn 2 atm fluxes | ESMF aave | map_MPASO_QU120km_TO_ne30np4_aave.151110.nc | |
ocn 2 atm state | ESMF aave | map_MPASO_QU120km_TO_ne30np4_aave.151110.nc | |
river 2 ocean | map_r05_to_QU120km_nn_151110.nc | Made with ESMF | |
lnd 2 river | |||
river 2 lnd | map_0.5x0.5_nomask_to_ne30np4_nomask_aave_da_c121019.nc |
Domain | file |
---|---|
atm | domain.lnd.ne30np4_mpas120.151113.nc |
lnd | domain.lnd.ne30np4_mpas120.151113.nc |
ice | domain.ocn.ne30np4_mpas120.151113.nc |
ocn | domain.ocn.ne30np4_mpas120.151113.nc |
Medium Resolution (BGC experiment)
Atm/Lnd ne30, 72L
Ocn/Sea-ice: oEC30to60 (eddy parameterized) AND oRRS30to10 (eddy permitting)
ice-sheet: ais20km (only for now. Greenland maybe next year)
River model: 0.5 degrees
Mapping | Preferred Tool | Name on input data archive (blank = doesn't exist) | Notes |
---|---|---|---|
atm 2 ocn fluxes | ESMF aave | ||
atm 2 ocn state | Tempest conserve | tempest | |
atm 2 ocn vector | Tempest conserve | map_ne30np4_to_oEC60to30_conserve_151207.nc | tempest |
ocn 2 atm fluxes | ESMF aave | map_oEC60to30_TO_ne30np4_aave.151207.nc | |
ocn 2 atm state | ESMF aave | map_oEC60to30_TO_ne30np4_aave.151207.nc | |
lnd 2 ice sheet | ESMF aave | ||
ice sheet 2 ocean fluxes | ESMF | To be updated to conservative mapping | |
ice sheet 2 ocean state | ESMF | ||
ice sheet 2 ocean runoff | |||
ocean 2 ice sheet fluxes | ESMF | To be updated to conservative mapping | |
ocean 2 ice sheet state | ESMF | ||
river 2 ocean | runoff_map tool nn, using 'rtm' gridtype note that the smoothed version will not work | ||
lnd 2 river | map_ne30np4_to_0.5x0.5rtm_aave_da_110320.nc | ||
river 2 lnd | map_0.5x0.5_nomask_to_ne30np4_nomask_aave_da_c121019.nc |
Domain | file |
---|---|
atm | domain.lnd.ne30np4_oEC60to30.20151214.nc |
lnd | domain.lnd.ne30np4_oEC60to30.20151214.nc |
ice | domain.ocn.ne30np4_oEC60to30.20151214.nc |
ocn | domain.ocn.ne30np4_oEC60to30.20151214.nc |
High Res Transition Grid (Proposed)
For use as a high-throughput testing case for tuning v1 low-res atmosphere coupled to eddy permitting ocean (avoids biases from ocean eddy parameterization that will be in the medium res grid but not in the high res grid).
Per coupled model group: Decision on if this grid will be used to be based on cost vs the medium resolution (BGC) grid. It is possible that this configuration will only be slightly more expensive than the medium resolution BGC grid, while having biases similar to the high-res grid. Hence this configuration might be a better warmup problem for high-res then using the BGC grid.
Atm/Lnd: ne30, 72L
Ocn/Sea-ice: oRRS30to10
Ice Sheet: ais20km
River model: 0.5 degrees
Mapping | Preferred Tool | Name on input data archive (blank = doesn't exist) | Notes |
---|---|---|---|
atm 2 ocn fluxes | ESMF aave | ||
atm 2 ocn state | Tempest conserve | ||
atm 2 ocn vector | Tempest conserve | ||
ocn 2 atm fluxes | ESMF aave | ||
ocn 2 atm state | ESMF aave | ||
lnd 2 ice sheet | |||
ice sheet 2 ocean fluxes |
| ||
ice sheet 2 ocean state | |||
ice sheet 2 ocean runoff | |||
ocean 2 ice sheet fluxes | |||
ocean 2 ice sheet state | |||
river 2 ocean | |||
lnd 2 river |
| ||
river 2 lnd |
|
Domain | file |
---|---|
atm | |
lnd | |
ice | |
ocn |
High Res (Water Cycle and Cryosphere experiment):
Atm/Lnd: ne120, 72L
Ocn/Sea-ice: oRRS15to5
Ice Sheet: ais14to4km (want higher resolution. Down to 1km. Need to generate mesh)
River model: 0.5 degrees
Mapping | Physical examples | Preferred Tool | Name on input data archive (blank = doesn't exist) | Notes |
---|---|---|---|---|
atm 2 ocn fluxes | precip, shortwave | ESMF aave | ||
atm 2 ocn state | temp, pressure | Tempest conserve | ESMF patch file Tempest failed, Paul Ullrich investigating | |
atm 2 ocn vector | wind | Tempest conserve | map_ne120np4_to_oRRS15to5_patch.160203.nc | ESMF patch file Tempest failed, Paul Ullrich investigating |
ocn 2 atm fluxes | sensible, latent HF | ESMF aave | map_oRRS15to5_to_ne120np4_aave.160203.nc | |
ocn 2 atm state | SST | ESMF aave | map_oRRS15to5_to_ne120np4_aave.160203.nc | |
lnd 2 ice sheet | SMB | ESMF aave | ||
ice sheet 2 ocean fluxes | meltwater, SHFLX | ESMF aave - do we also want nearestdtos? | ||
ice sheet 2 ocean state | ice sheet temp | ESMF aave - do we also want nearestdtos? | ||
ice sheet 2 ocean runoff | icebergs | |||
ocean 2 ice sheet fluxes | accretion, SHFLX | ESMF aave - do we also want nearestdtos? | ||
ocean 2 ice sheet state | ocean temp | ESMF aave - do we also want nearestdtos? | ||
river 2 ocean | river discharge | |||
lnd 2 river | runoff | |||
river 2 lnd | flooding |
Domain | file |
---|---|
atm | |
lnd | |
ice | |
ocn |