...
ne30 v0/v1 | ne30 alternative (was this ever used?) | ne30 small dtime option | ne120 before 8/10/16 | ne120 after 8/10/16 | ne120 small dtime option | Explanation | |
|---|---|---|---|---|---|---|---|
| dtime | 30 min | 30min | 15min | 15 min | 15 min | 450s | Timestep used for most physics processes and for coupling between physics and dynamics For se_ftype=1, physics tendencies are applied as a hard adjustment every dtime seconds. |
| se_nsplit | 2 dt_remap=15m | 3 dt_remap=10m | 1 dt_remap=15m | 4 dt_remap=225s | 6* dt_remap=150 | 2 dt_remap=225s | dtime/se_nsplit = time between vertical remaps of the semi-Lagrangian vertical coordinate. For se_ftype=0, physics tendencies are "dribbled" into the dynamics every dt_remap seconds. |
| se_rsplit | 3 dt_tracer=300s | 2 dt_tracer=300s | 3 dt_tracer=300s | 3 dt_tracer=75s | 2* dt_tracer=75s | 3 dt_tracer=75s | dtime/(se_nsplit*se_rsplit) = timestep used for tracer timestep For ne30, dt_tracers = 360s is probably stable, but we usually use 300s For ne120, dt_tracers = 90s is probably stable, but we usually use 75s. |
| se_qsplit | 1 | 1 | 1 | 1 | 1 | 1 | dtime/(se_nsplit*se_qsplit*se_rsplit) = timestep used for dynamics calculations This should always be 1, so that dt_dyn = dt_tracers. |
| hypervis_subcycle | 3 dt_vis=100s | 3 dt_vis=100s | 3 dt_vis=100s | 4 dt_vis=18.75s | 4 | 4 | dtime/(se_nsplit_se_qsplit*se_rsplit*hypervis_subcycle) = timestep used for hyperviscosity calculation |
| hypervis_subcycle_q | 1 | 1 | 1 | 1 | 1 | 1 | dtime/(se_nsplit_se_qsplit*se_rsplit*hypervis_subcycle_q) = timestep used for hyperviscosity calculation in tracer advection (namelist_definition.xml indicates that only '1' is supported in CAM?) |
| cld_macmic_num_steps | 6 | 6 | ? Po-Lun Ma ?3 | 3* | 3 | Number of times the code surrounding macrophysics + microphysics is subcycled. This means that dtime/cld_macmic_num_steps = timestep used for macrophysics and microphysics. | |
| clubb_timestep | 300 sec | 300 sec | 300 sec | 300 sec | I'm not sure what this means or how it relates to cld_macmic_num_steps | ||
| IRADSW | 2 steps | 4 steps (1 hr) | 4 steps (1 hr) | How frequently to compute SW radiation (in multiples of dtime). Radiation tendencies are taken from previous steps for steps when radiation is not recalculated. I think some scaling is made to account for zenith angle changes? | |||
| IRADLW | 2 steps | 4 steps | 4 steps | How frequently to compute LW radiation (in multiples of dtime). Radiation tendencies are taken from previous steps for steps when radiation is not recalculated. | |||
| *since AV1C-04 | *suggest to use |
...